Skip to content
- The ASNU gasoline injector flow bench has brought state-of-the-art technology to petrol fuel injector testing, fuel injector cleaning, and fuel injector servicing.
- If you want to “get serious” with your vehicle’s performance, then your fuel injectors need to be tested and cleaned, on the ASNU bench tester, such that your injectors are returned to as-new condition.
- Balanced fuel delivery from your injectors is paramount if your engine is to produce it`s maximum POWER and overall DRIVEABILITY .
- We are proud to use the ASNU injector bench tester equipment in our shop. This equipment has the ability to perform the following testing and cleaning of petrol injectors…
- A visual precleaning test of injector spray pattern.
- A quantitative precleaning measurement of injector fuel discharge volume flow.
- A precleaning pintle/orifice seal leak test.
- A precleaning pressure test for manufacturing/or damage defects for mechanical leaks. Mechanical leaks are non-repairable and the injector(s) must be replaced. In most cases…we have replacements on-hand.
- Ultrasonic cleaning in a chemical bath to chemically and ultrasonically breakdown “baked-on” fuel deposits.
- A visual post cleaning retest of injector spray pattern.
- A quantitative post cleaning measurement of injector fuel discharge flow volume
- A post cleaning pintle/orifice seal leak test, and mechanical leak test.
- Injectors can be tested across a wide range of simulated engine rpms and injector pulse timings.
- Range simulation can be from 3 to 15 milliseconds, and from 600 to 20,000 rpms.
- Injectors can be tested at normal fuel pressure and also at 1 bar below and 1 bar above normal fuel pressures. Normal test pressure is 3 bar , 44.1 psi (1 bar = 14.7 psi)
- The ASNU bench is also used to test ohms resistance for compromised/grounded coil windings. •A visual inspection is also performed to look for external and internal rust on and within the injector.
- Maximum performance of your vehicle’s engine requires injectors to be balanced in all aspects of spray pattern, flow rate, no leakage, and electrical integrity.
- The ASNU bench tester allows us to flow test, clean, retest, and return a set of injectors in “as-new” condition.
-
The cost for this service of Fuel Injector Cleaning is only £ 15.00 per injector
- PLEASE NOTE – ALL OF OUR PRICES INCLUDE VAT
Go to Top
